非晶态Pd—Cu—Si合金的晶化动力学研究

本文应用DSC研究了非晶态Pd-Cu-Si合金的晶化过程动力学.根据Kissinger峰移法和Arrhenius方程分别计算了晶化激活能,发现等温晶化动力学在0.15相似文献   

SOLUTION BEHAVIOUR OF VARIOUS ALLOYING ELEMENTS IN Ni_3Si

The solid solubilities of 15 common alloying elements added to the Ll_2-type intermetalliccompound Ni_3Si at 900°C have been estimated,and their substitution modes have been de-duced from the direction of solubility lobe of the compound.It is shown that the alloyingbehaviours in Ni_3Si are determined by both size and electronic factors,i.e.,the substitutionmode is governed by electronic configuration and solubility by the both.An interactionparameter is presented to describe quantitatively the influence of electronic configuration onsubstitution mode and the solubility limit can be successfully explained together with atom radius.     

ELECTRON MICROANALYSIS FOR LASER MELTED ZONE IN 45 STEEL WITH Fe-Ni-Cr COATING

The Fe-Ni-Cr coating laver has been alloyed with 45 steel base metal by transverse.flow typeCO_2 gas laser of maximum output 5kW.The characteristics of the melted zone and the es-sence of the“bright band”has been investigated using the electron microscopy.The resultsshow that the“bright band”belongs to the melted zone and is a vertical section of the planecrystal,The width of the“bright band”equals the height of the plane crystal,which decreaseswith the increase of laser beam scanning rate and the decrease of laser power.This has beenexplained in terms of constitutional supercooling G/R.     

TEMPERATURE DEPENDENCE UPON VISCOSITY OF Ni-P ALLOY ON AMORPHOUS FORMATION

The viscous flow of amorphous alloys near T_gis closely related to the viscosity of liquid alloys.On the basis of the measured surface tension and density for Ni-P binary alloys,the correla-tion between the viscosity of the melt and viscous flow process of the amorphous alloy is inves-tigated.The relationship between viscosity and temperature for Ni-P alloys going from liquidto amorphous solid may be described by the following formula:     

EFFECT OF SURFACE OXIDATION ON THERMAL STABILITY OF AMORPHOUS Pd_(80)Si_(20)

<正> 本工作是在电子显微镜内原位加热的同时,观察α-Pd_(80)Si_(20)的氧化过程及其对晶化的影响。 用双喷制备的试样安装在JEM-200CX电子显微镜的加热台上,以不同的速度进行加热,并对氧化过程进行原位观察。试样室的真空度保持在～10~(-5)Pa,然后将原位观察过的试样,在Auger谱仪中用Ar~+离子对试样表面逐层剥离,以分析成分随深度的变化。为了对比,试样也在Auger谱仪中(真空度～10~(-7)Pa)进行加热,观察表面层成分随温度的变化。     

TOPOLOGICALLY CLOSE-PACKED PHASES IN SUPERALLOYS: New Phases and Domain Structures

<正> 一、引言 高温合金中拓扑密堆相是众所周知的σ,Laves,μ,δ,P相等的总称。这些相由于使不锈耐热钢及高温合金变脆而引起人们的重视。高温合金的合金化程度高且较为复杂,成分控制或热处理不当都会导致拓扑密堆相析出,从而恶化材料的热强性及韧性。因此,在拓扑密堆相的形成条件(包括成分及加工热处理条件)、析出的动力学等方面都已经进行了大量的研究。拓扑密堆相的晶体结构研究则是这些工作的基础。 早在1927年,Bain和Griffith就发现某些Fe-Cr合金变脆原因是由于有成份为FeCr的     

DECOMPOSITION AND PRECIPITATION OF CARBIDES IN HOT-ROLLED Si-Fe SHEETS

在高温金相显微镜下,直接观察碳化物在热轧硅钢中的分解与析出过程。指出冷却速度对碳化物析出形态有很大影响。用差热分析确定了碳化物的分解与析出温度。所得结果为改进热轧硅钢生产工艺提供了重要的依据。     

A NEW METHOD FOR DETERMINATION OF DIFFRACTION LINE POSITION

本文提出一种与线形变化无关的测定衍射线线位的新方法。测位精度可达△θ±0.01°。可用于在衍射线形对称增宽的条件下,精确测定点阵常数。     

THE EFFECT OF ALLOYING ELEMENTS ON AGE BRITTLENESS OF A Cr-Mn-C-N AUSTENITIC HEAT-RESISTANT STEEL

叙述并討論了合金元素对鉻錳碳氮奥氏体耐热鋼时效变脆的影响的初步实驗結果。結果指出钼釩促使这种类型鋼的变脆,硼能改善其时效脆性,适合于設計的要求。微量混合稀土元素对改善时效脆性的作用不明显。 金相和电子显微镜及X射线研究的結果指出,晶界和沿晶界边緣組織結构的变化是影响脆性的主要因素。时效后的主要沉淀为M_(23)C_6和(Cr,Fe)_2N;含钼較高的鋼种(>1％Mo),在更长时間的时效以后,有x相及σ相的出現,当其量較多时,也可增加鋼的脆性。硼不但減緩某些相的析出,而且也可以改变它們的分布状态,使晶界发生不連續沉淀,从而对韌性的降低較少。     

半固态A356合金微观组织特征对充型能力的影响

采用电磁搅拌法制备了具有不同微观组织特征的半固态A356合金浆料,用图像分析软件对浇注前浆料金相试样的初生相微观组织特征进行了测定,利用间接挤压铸造方法铸造阿基米德螺旋线试样,以挤压成形后的螺旋线试样长度衡量充型能力,通过多元回归,建立了半固态A356合金初生相微观组织特征与充型长度之间的数学表达式。结果表明:半固态浆料充型能力不仅与初生相微观组织特征参数有关,微观组织特征参数的交互作用对充型能力的影响也较大。利用该表达式可以对半固态浆料充型能力进行预测,进而指导半固态浆料制备参数设计、间接挤压铸造工艺设计和缺陷预测。